Next generation KSCC hill communications
Re: Next generation KSCC hill communications
Forgot to ask: would a small (1/4" or so) bend on the bottom to help stiffen the bottom edge 'panel' be OK w/ your set-up (i.e. as in not interfere w/ the batteries/electronics)? Thinkin' long term durability...
Dave P. - #189 (SCCV)
'02 MINI Cooper S+
'02 MINI Cooper S+
- walterclark
- Posts: 1442
- Joined: Sun Feb 08, 2009 12:57 pm
- Location: Dover, MA.
- Contact:
Re: Next generation KSCC hill communications
Not needed, but if it somehow makes it easier to fab it is OK. It needs to be the same or shorter than the side tabs and because of the shape of the ammo box corners, this tab need to be trimmed back something like the side tabs. Oh, not stated - the tabs all bend away from the drawing front view (shown) 90 degrees.
The older I get the better I was.
Re: Next generation KSCC hill communications
We'll (he'll) get one fabbed up and out to you...
Dave P. - #189 (SCCV)
'02 MINI Cooper S+
'02 MINI Cooper S+
- walterclark
- Posts: 1442
- Joined: Sun Feb 08, 2009 12:57 pm
- Location: Dover, MA.
- Contact:
Re: Next generation KSCC hill communications
I needed to make a minor revision to the cover drawing. It is located here: http://home.comcast.net/~walterclark1/t ... wing_C.jpg
The change just relocates 2 of the holes in the top edge 1/8" closer to the front. I had to change this when I finally got the Velcro that will hold the speaker box in place and found it is thicker than I expected.
The change just relocates 2 of the holes in the top edge 1/8" closer to the front. I had to change this when I finally got the Velcro that will hold the speaker box in place and found it is thicker than I expected.
The older I get the better I was.
- walterclark
- Posts: 1442
- Joined: Sun Feb 08, 2009 12:57 pm
- Location: Dover, MA.
- Contact:
Re: Next generation KSCC hill communications
Anyone know Dave and what happened to him?DaveVT02S wrote:We'll (he'll) get one fabbed up and out to you...
I sent a PM to him mid April to check on this but it hasnt been delivered because he has not visited the board since April 13.
This week I went ahead and hammered out a second panel so I can at least finish up the second box (that makes the Start and Finish boxes done) before we need to use the system at Burke. That will probably be it for this season.
The older I get the better I was.
Re: Next generation KSCC hill communications
He is at SLMP with Steve Jones this weekend. I sent Steve a message to ask him about them.
Nick
- Rabbit Farmer
- Posts: 2260
- Joined: Wed Jun 25, 2003 11:37 pm
- AntiSpam: No
- Location: Earth
- Contact:
Re: Next generation KSCC hill communications
I spoke with Dave. The guy that was supposed to build them was in jail. I asked Dave to get with Nick as Dave said he had other options.
Go Fast VW & Audi parts at FastAddiction.com
- walterclark
- Posts: 1442
- Joined: Sun Feb 08, 2009 12:57 pm
- Location: Dover, MA.
- Contact:
Re: Next generation KSCC hill communications
This winter I began the expansion of the new headsets to all the checkpoints. They will all use the single earspeaker/boom mic headset I tried out last season. The mic output levels will be much higher in the new system (in the past this level was limited to what a carbon mic can produce) so it should be possible to have more volume in the headsets where desired and the start tone and background wire noise will, by comparison sound less intrusive than last year.
Thus far I have all the headsets and headset control/PTT boxes completed and tested. I am waiting on fabrication of the aluminum panels to build out the ammo boxes and finish this. I am hoping the person who promised these is making them.
Thus far I have all the headsets and headset control/PTT boxes completed and tested. I am waiting on fabrication of the aluminum panels to build out the ammo boxes and finish this. I am hoping the person who promised these is making them.
The older I get the better I was.
- Rabbit Farmer
- Posts: 2260
- Joined: Wed Jun 25, 2003 11:37 pm
- AntiSpam: No
- Location: Earth
- Contact:
Re: Next generation KSCC hill communications
Since I worked an entire season last year instead of driving, I got to experience the improvements with the KSCC setup. I loved it! Kudos and drinks all around (should I bring the 100 proof Captain?).
Go Fast VW & Audi parts at FastAddiction.com
Re: Next generation KSCC hill communications
Thanks Walter!walterclark wrote:and the start tone and background wire noise will, by comparison sound less intrusive than last year.
Over in the SCCV forums we have a few more smiley options, if they had them here i would be adding both
:applause: smiley guy (4th from the end)
http://forums.sccv.org/posting.php?mode=smilies&f=49#
and the :VWkneel: (self explanatory)
http://forums.sccv.org/posting.php?mode ... start=200#
animation to this post.
Laura Wheelock