who can anneal a chassis?

[jkale]

anybody know where i can get a chassis annealed? The oven needs to be able to reach temps of 1550* F.

[MX5 Driver]

Hmmm, I could do this in one of our furnaces at work. I'd probably only charge you for materials cause it's going to take a lot of sawsall blades to get it small enough to fit in our furnaces....

[jkale]

Hmmm, I could do this in one of our furnaces at work. I'd probably only charge you for materials cause it's going to take a lot of sawsall blades to get it small enough to fit in our furnaces....

sounds good... seriously though

[Rabbit Farmer]

Joey. Do you know of anyone else that has ever tried this? (not that it should prevent you from doing it)

[jkale]

Joey. Do you know of anyone else that has ever tried this? (not that it should prevent you from doing it)

I do not know of anyone in particular, but it is the only right way to normalize a cromoly cage thoroughly..

[sachilles]

You might try the forums at grassroots motorsports, someone from around new england on there might have the answer.
I've also put a call into a buddy of mine who builds circle track cars to see if he knows anyone.

[sachilles]

One suggestion thus far is Bodycote in Worcester Mass. No phone number given, but I'm sure you can find it.

[jkale]

Thanks Seth, Ill check into it..

[jkale]

So, I talked to Bodycote. They can do it. They have an oven that is 12'x7'x6'. The only problem is my car is 13' 6". I guess i could chop some off. or maybe build something to keep the chassis angled.. It all depends on their price...still waiting on a quote.

[sachilles]

It might fit.

The distance from the bottom corner to the top corner of the booth would be 13.9 ft.